- ページ 4

プリンター Ricoh Pro L4130のPDF ケア＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Pro L4130 29 ページ。 Wide format color digital imaging system
Ricoh Pro L4130 にも：安全上のご注意 (17 ページ), 仕様 (4 ページ), 印刷マニュアル (8 ページ)

ページを印刷する

Capping station (Cleaning the Wiper and Cap) ("Cleaning the Wiper and Cap" Chapter

4 of the Operation Manual)

Cleaning the Wiper and Cap

Ink, dust, or paper waste is pooled on the wiper. To keep stable printing quality, wash the wiper and cap at the

end of the day.

Tools required for Maintenance

• Be sure to wear the supplied goggles and gloves when maintaining the capping

station.Otherwise, you may get ink in your eyes.

• Do not move the carriage out of the capping station by hand.When it is desirable to move the

carriage, press the

• Further, in the cases as explained below, replace the wiper with the new one.

Even if you clean the wiper enough, nozzle clogging etc. occurs frequently

When the wiper is deformed

When the stuck ink can not be wiped off

When the warning for wiper replacement is indicated

• When cleaning the wiper, be careful that lint from the clean stick or kimwipe® does not get left on the

wiper.Remaining lint may cause image quality to deteriorate.

• Clean the wiper completely until the stained ink on the top

edge of the wiper film is washed away after soaking the wiper

in the Cleaning Fluid for 1-24 hours. It is recommended to

prepare two or more wipers and use them alternately.

• If cleaning of the wiper is not enough, it may cause nozzle

clogging.

• Do not wash the wiper with other than the Kimwipe®.

Otherwise, lint may remain on the wiper.

Press the

Press

• Maintenance kit

• Clean stick

key to execute the carriage-out.

MAINT.

key in LOCAL.

MAINT.

key.

to select [STATION MAINT.].

• Gloves

• Goggles

Top edge of the film

Reference for cleaning

CARR I AGE OU T

MOVE POS I T I ON

: S T A T I ON MA I N T .

MOVE POS I T I ON

: S T A T I ON MA I N T .

[ EN T ]