- ページ 7

プリンター Ricoh Pro L4160のPDF ケア＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Pro L4160 29 ページ。 Wide format color digital imaging system
Ricoh Pro L4160 にも：安全上のご注意 (17 ページ), 仕様 (4 ページ), 印刷マニュアル (8 ページ)

ページを印刷する

Clean the cap rubber and cap rubber cover.

• Wipe off the ink sticking to the cap rubber and cap rubber cover

with a clean stick dipped in Cleaning Fluid for maintenance.

(Wipe off so that you can see blue color of the cap rubber.)

Wipe off so that Cleaning Fluid for maintenance will not remain.

Before cleaning

Press the

Close the right maintenance cover then press the

key.

• After its initial operation, the machine returns to step1.

Further, in the cases as explained below, replace the wiper with the new one.

Even if you clean the wiper enough, nozzle clogging etc. occurs frequently

When the wiper is deformed

When the stuck ink can not be wiped off

When the warning for wiper replacement is indicated

When the warning message for replacing wiper is shown, confirm whether

there is no damage and fuzz at the top edge of the wiper film. If there is no

damage on the top edge of the wiper film, it is possible to use the wiper contin-

uously without replacing it.

After cleaning

key after the cleaning.

Cap rubber

Cap rubber cover

C l o s e c o v e r

COMP L E T ED

[ EN T ]