Ricoh Pro L4160 관리 및 유지보수 매뉴얼 - 페이지 7

{카테고리_이름} Ricoh Pro L4160에 대한 관리 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro L4160 29 페이지. Wide format color digital imaging system
Ricoh Pro L4160에 대해서도 마찬가지입니다: 안전 주의사항 (17 페이지), 사양 (4 페이지), 매뉴얼 인쇄 (8 페이지)

페이지 인쇄

Clean the cap rubber and cap rubber cover.

• Wipe off the ink sticking to the cap rubber and cap rubber cover

with a clean stick dipped in Cleaning Fluid for maintenance.

(Wipe off so that you can see blue color of the cap rubber.)

Wipe off so that Cleaning Fluid for maintenance will not remain.

Before cleaning

Press the

Close the right maintenance cover then press the

key.

• After its initial operation, the machine returns to step1.

Further, in the cases as explained below, replace the wiper with the new one.

Even if you clean the wiper enough, nozzle clogging etc. occurs frequently

When the wiper is deformed

When the stuck ink can not be wiped off

When the warning for wiper replacement is indicated

When the warning message for replacing wiper is shown, confirm whether

there is no damage and fuzz at the top edge of the wiper film. If there is no

damage on the top edge of the wiper film, it is possible to use the wiper contin-

uously without replacing it.

After cleaning

key after the cleaning.

Cap rubber

Cap rubber cover

C l o s e c o v e r

COMP L E T ED

[ EN T ]