- ページ 5

プリンター Ricoh Savin CLP128のPDF 製品サポートマニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Savin CLP128 25 ページ。 Product guide

ページを印刷する

G130/G131 Product Support Guide

Installation Requirements

Temperature Range:

Humidity Range:

Ambient Illumination:

Ventilation:

Do not expose the machine to the following:

1) Direct cool air from an air conditioner

2) Direct heat from a heater

Do not install the machine in areas that get exposed to corrosive gas.

Install the machine locations lower than 2,500 m (8,200 ft.) above sea level.

Install the machine on a strong, level base.

Do not install the machine in areas that get strong vibrations.

Machine level

Front to back:

Within 5 mm (0.2")

Right to left:

Within 5 mm (0.2")

Power Requirements

Input voltage level: 120 V, 60 Hz: More than 11A (G130) / 12A (G131)

Permissible voltage fluctuation: ±10 %

Do not place anything on the power cord

The required wall outlet is a NEMA 5-15R

CAUTION: Make sure the outlet and the machine are grounded.

CAUTION: Insert the plug firmly into the outlet.

CAUTION: Avoid using an extension cord or adapter plug.

Installation Times

Mainframe: 30 minutes

Peripherals:

Peripherals, which can be installed by users:

PFU/LCT

Duplex Unit

IEEE1284

IEEE1394

Blue tooth

Wireless LAN

USB Host I/F

____________________5_____minutes

Direct Camera Printing ______________5_____minutes

Gigabit Ethernet____________________5_____minutes

Peripherals, which should be installed by technicians:

Finishers

Punch Kit

NOTE:

These are installation times for after the machine has been removed from the carton.

Version – 1.0

10 C to 32 C (50 F to 89.6 F)

15% to 80% RH

Less than 2,000 lux (do not expose to direct sunlight)

3 times/hour/person or more

minutes