- ページ 3

IP電話 Cisco Unified 7912GのPDF 概要をオンラインで閲覧またはダウンロードできます。Cisco Unified 7912G 20 ページ。 Ip talk series
Cisco Unified 7912G にも：ユーザーマニュアル (21 ページ), ユーザーマニュアル (16 ページ), ユーザーマニュアル (25 ページ), 電話マニュアル (46 ページ), クイック・リファレンス (2 ページ), ネットワーク設定の構成 (34 ページ), リファレンス・マニュアル (20 ページ), インストールマニュアル (8 ページ), クイック・リファレンス (4 ページ)

Next, use the Ethernet cable included with your phone

to connect the access port on the back of your phone to

your desktop computer. Your Cisco IP Phone now

shares a network connection with your computer.

Connect the handset to the handset port. Ensure that

Step 2

the end of the cord with the longer uncoiled section is

connected to the body of the phone.

If your system administrator delivered your

Step 3

Cisco IP Phone with a power supply, connect the power

supply plug to the adapter port on the back of the

phone. Then use the power cable to connect the power

supply to a standard power outlet in your workspace.

If your system administrator delivered your phone

without a power supply, your phone probably receives

power through the Ethernet connection.

Once you connect the Cisco IP Phone to its power source, a

start-up process begins. After several minutes, startup is

complete and your phone is ready to use.

If you plan to power your phone locally (instead of

Caution

receiving power through the Ethernet connection),

use only a Cisco 48 volt power supply designed to

work with a Cisco IP Phone.

If your Ethernet cable has a cover over the RJ-45

Tip

connector, the cover can prevent the phone from sitting

squarely on a surface. To fix this problem, pull the

cable cover back to expose the RJ-45 connector.