Cisco Unified 7912G 한눈에 보기 - 페이지 3

{카테고리_이름} Cisco Unified 7912G에 대한 한눈에 보기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Unified 7912G 20 페이지. Ip talk series
Cisco Unified 7912G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (25 페이지), 전화 매뉴얼 (46 페이지), 빠른 참조 (2 페이지), 네트워크 설정 구성 (34 페이지), 참조 매뉴얼 (20 페이지), 설치 매뉴얼 (8 페이지), 빠른 참조 (4 페이지)

Next, use the Ethernet cable included with your phone

to connect the access port on the back of your phone to

your desktop computer. Your Cisco IP Phone now

shares a network connection with your computer.

Connect the handset to the handset port. Ensure that

Step 2

the end of the cord with the longer uncoiled section is

connected to the body of the phone.

If your system administrator delivered your

Step 3

Cisco IP Phone with a power supply, connect the power

supply plug to the adapter port on the back of the

phone. Then use the power cable to connect the power

supply to a standard power outlet in your workspace.

If your system administrator delivered your phone

without a power supply, your phone probably receives

power through the Ethernet connection.

Once you connect the Cisco IP Phone to its power source, a

start-up process begins. After several minutes, startup is

complete and your phone is ready to use.

If you plan to power your phone locally (instead of

Caution

receiving power through the Ethernet connection),

use only a Cisco 48 volt power supply designed to

work with a Cisco IP Phone.

If your Ethernet cable has a cover over the RJ-45

Tip

connector, the cover can prevent the phone from sitting

squarely on a surface. To fix this problem, pull the

cable cover back to expose the RJ-45 connector.