- ページ 39

プリンター Ricoh SP 311DNWのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Ricoh SP 311DNW 45 ページ。 Network settings guide
Ricoh SP 311DNW にも：クイック・インストール・マニュアル (2 ページ), 仕様 (4 ページ), インストレーション・マニュアル (2 ページ)

ページを印刷する

Authentication Select authentication method:

Encryption Select an encryption method.

WEP Key Max.

Length

WEP Key Valid

Characters

7. When finished, click [Apply]

8. Turn printer power switch Off. Wait a moment, and turn On.

9. Next, install Printer Driver & Utility. See

Note:

For further information on Smart Organizing Monitor, please refer to the User Guide, p60.

•

Open System

•

Shared Key

•

WPA2-PSK

•

Mixed Mode WPA/WPA2

•

Note: If Ad Hoc is selected for [Communication Mode], you can select only [Open

System] and [Shared Key].

If [Ad-Hoc] is selected for [Communication Mode], you can select only [None] and

[WEP].

[None]

•

When it is ON, communication will not be secured by encryption.

[WEP]

•

When it is ON, communication will be encrypted in WEP (Wired Equivalent

Privacy).

Specify [WEP Key Length], [WEP Transmit Key ID], and [WEP Key Format] and

enter [WEP Key]. The following table shows the number and types of characters

you can enter, depending on the key settings.

WEP Length is 64 bits

WEP format is Hex

10 characters

0-9, A-F, a-f

[WPA2-PSK]

•

When this is selected, communication will be encrypted with WPA2 (Wi-Fi

Protected Access 2). Enter a value in [WPA Passphrase] that contains from 8 to

64 characters.

• [Mixed Mode WPA/WPA2]

When this is selected, communication will be encrypted with WPA (Wi-Fi

Protected Access) or WPA2 (Wi-Fi Protected Access 2). Enter a value in [WPA

Passphrase] that contains from 8 to 64 characters.

[OK] to save changes, and then click [Close].



3.2 Network Quick

RICOH SP 311DNw B&W Network Laser Printer

WEP format is

ASCII

5 characters

26 characters

0x20-0x7e

0-9, A-F, a-f

Install.

Getting Started Guide

WEP Length is 128 bits

WEP format is

Hex

ASCII

13 characters

0x20-0x7e