ページを印刷するModel:
SP3
2) Check to see if the upper guide plate (A13444732) or the duplex tray are deformed.
If so, replace the parts.
Check procedures: Pull out the duplex unit and put paper in between the upper
guide plate and the duplex tray as shown below. Next, insert the tray and note
whether or not a duplex jam is indicated. If it is, then it's OK. (This checks the
inverter feeler detector and the entrance feeler detector.)
• Please inform the users that they should pull out the duplex unit all the way when
removing paper when a jam occurs. If the duplex unit is only pulled out part way,
this may lead to deformation of the upper guide plate and the duplex tray.
Entrance Feeler
Paper
3) Check to see if there is enough grease on the SP clutch.
∗Grease should be added at the 120K PM visit. Grease: Mobil Temp 78.
Lack of grease may result in stack jams.
T
B
echnical
- Duplex Jam indicated = OK -
Inverter Feeler
Upper Guide Plate
Entrance Feeler
Duplex Tray
ulletin
Date:
15-Apr-98
PAGE: 4/4
No:
14
Inverter Feeler
Paper