Ricoh SP3 Technical Bulletin - Page 23

Browse online or download pdf Technical Bulletin for Printer Ricoh SP3. Ricoh SP3 28 pages.

Print Page

Model:

SP3

2) Check to see if the upper guide plate (A13444732) or the duplex tray are deformed.

If so, replace the parts.

Check procedures: Pull out the duplex unit and put paper in between the upper

guide plate and the duplex tray as shown below. Next, insert the tray and note

whether or not a duplex jam is indicated. If it is, then it's OK. (This checks the

inverter feeler detector and the entrance feeler detector.)

• Please inform the users that they should pull out the duplex unit all the way when

removing paper when a jam occurs. If the duplex unit is only pulled out part way,

this may lead to deformation of the upper guide plate and the duplex tray.

Entrance Feeler

Paper

3) Check to see if there is enough grease on the SP clutch.

∗Grease should be added at the 120K PM visit. Grease: Mobil Temp 78.

Lack of grease may result in stack jams.

echnical

- Duplex Jam indicated = OK -

Inverter Feeler

Upper Guide Plate

Entrance Feeler

Duplex Tray

ulletin

Date:

15-Apr-98

PAGE: 4/4

No:

Inverter Feeler

Paper