- ページ 3

デジタルカメラ Ricoh CX2のPDF ファームウェア・アップデートの手順をオンラインで閲覧またはダウンロードできます。Ricoh CX2 5 ページ。 Firmware update
Ricoh CX2 にも：パンフレット＆スペック (6 ページ)

Select [Yes], and press the ADJ./OK button.

• The SD memory card is formatted.

Caution

If you format a card that still has images stored on it, the images will be lost. Save the images you do not want to erase in

your computer before formatting the card.

Turn the camera off, and connect the camera and computer with the

provided USB cable.

• The camera turns on automatically. If the camera does not turn on automatically, press the

POWER button and turn the power on.

• If DC Software is installed in your Windows PC, DL-10 may automatically start up. In this

case, exit DL-10.

• Click [Cancel] if the [Removable Disk] dialog appears in Windows XP or Windows Vista.

• If iPhoto starts up in Mac OS X, exit iPhoto.

Copy the files [hlaunch3] and [hlaunch8], created when the firmware was

extracted, into [RICOHDCX] root directory. The [RICOHDCX] will be

mounted as follows. For Windows, in [My computer]; for Macintosh, on

the desktop.

• The camera's drive name may differ depending on the OS you are running.

e.g. [Removable Disk], etc.

Confirm that the files have been copied.

10.

For Windows

When the copying of the firmware is completed, double-click the [Safely

Remove Hardware] icon in the task bar.

For Macintosh

Drag and drop the [RICOHDCX] icon to the [Trash] icon. Once the icon

has disappeared, proceed to Step 14.

Caution

If you skip the procedures in Step 10, the firmware copy may not be successful.

11.

Select [USB Mass Storage Device], and click [Stop].

12.

Click [OK].

hlaunch3

hlaunch8

RICOHDCX

For Macintosh

hlaunch3

hlaunch8