デジタルカメラ Ricoh CX2のPDF ファームウェア・アップデートの手順をオンラインで閲覧またはダウンロードできます。Ricoh CX2 5 ページ。 Firmware update
Ricoh CX2 にも：パンフレット＆スペック (6 ページ)

Firmware Update Instruction Manual

This manual explains the procedures for downloading the CX2 firmware from the Ricoh website

and updating the camera's firmware.

Perform the following operations to update the firmware.

1. Check the current version of the firmware

Caution

Before updating, be sure to check the firmware version through the following method. If the installed firmware is the latest

version, there is no need to update.

Make sure that the camera's power is turned off.

While pressing the ADJ./OK button @ (1), hold

down the 6 (Playback) button (2) for 2-3 seconds.

• The firmware version will be displayed on the picture display for

about 20 seconds.

Check the firmware version displayed on the picture display.

• e.g. When the current version of the firmware is V1.00, the version will be shown as [MAIN

: V 1.00] as follows:

MAIN : V 1.00

BKUP : V X.XX

MONI : V X.XX

ADJD : V X.XX

EXTD : V X.XX

CPU1 : V X.XX

: XXXXXX