Ricoh CX2 펌웨어 업데이트 지침

{카테고리_이름} Ricoh CX2에 대한 펌웨어 업데이트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh CX2 5 페이지. Firmware update
Ricoh CX2에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지)

Firmware Update Instruction Manual

This manual explains the procedures for downloading the CX2 firmware from the Ricoh website

and updating the camera's firmware.

Perform the following operations to update the firmware.

1. Check the current version of the firmware

Caution

Before updating, be sure to check the firmware version through the following method. If the installed firmware is the latest

version, there is no need to update.

Make sure that the camera's power is turned off.

While pressing the ADJ./OK button @ (1), hold

down the 6 (Playback) button (2) for 2-3 seconds.

• The firmware version will be displayed on the picture display for

about 20 seconds.

Check the firmware version displayed on the picture display.

• e.g. When the current version of the firmware is V1.00, the version will be shown as [MAIN

: V 1.00] as follows:

MAIN : V 1.00

BKUP : V X.XX

MONI : V X.XX

ADJD : V X.XX

EXTD : V X.XX

CPU1 : V X.XX

: XXXXXX