- ページ 2

デジタルカメラ Ricoh gr digital IIIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ricoh gr digital III 5 ページ。 Firmware update
Ricoh gr digital III にも：ユーザーマニュアル (2 ページ)

2. Extract the firmware

Download the firmware from the Ricoh website.

Double-click, or right-click and select [Open] on the downloaded file.

• A dialog screen appears.

Click [OK].

• The folder [GR DIGITAL 3 Update] is created, and the firmware is extracted to the folder

[Firmware relX.XX (where X.XX is the version number)]. Check that [glaunch3] (firmware

file) and [glaunch8] (adjusted value file) are inside the folder [Firmware relX.XX].

For Windows

3. Copy the firmware to an SD memory card

There are two ways to copy the firmware into an SD memory card.

• With an SD memory card loaded in the camera, connect the camera and computer with the

provided USB cable, and copy the firmware to the SD memory card

• Using a card reader or a card writer, copy the firmware to an SD memory card (a card reader

or card writer is required)

To copy the firmware by connecting the camera and computer with the USB

cable

If DC Software is installed on your Windows PC, check that DL-10 is not

active.

If DL-10 is active, right-click on the DL-10 icon in the task bar, and click

[Exit].

• If the DL-10 icon is not displayed in the task bar, you do not need to perform Step 2.

Load a battery with adequate remaining power into the camera.

Load the SD memory card into the camera, and turn the power on.

Display the camera's setup menu tab, select [Format [Card]], and press

the $ button.

glaunch3

glaunch8

For Macintosh

glaunch3

glaunch8