Ricoh gr digital III 사용 설명서 - 페이지 2

{카테고리_이름} Ricoh gr digital III에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh gr digital III 5 페이지. Firmware update
Ricoh gr digital III에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)

페이지 인쇄

2. Extract the firmware

Download the firmware from the Ricoh website.

Double-click, or right-click and select [Open] on the downloaded file.

• A dialog screen appears.

Click [OK].

• The folder [GR DIGITAL 3 Update] is created, and the firmware is extracted to the folder

[Firmware relX.XX (where X.XX is the version number)]. Check that [glaunch3] (firmware

file) and [glaunch8] (adjusted value file) are inside the folder [Firmware relX.XX].

For Windows

3. Copy the firmware to an SD memory card

There are two ways to copy the firmware into an SD memory card.

• With an SD memory card loaded in the camera, connect the camera and computer with the

provided USB cable, and copy the firmware to the SD memory card

• Using a card reader or a card writer, copy the firmware to an SD memory card (a card reader

or card writer is required)

To copy the firmware by connecting the camera and computer with the USB

cable

If DC Software is installed on your Windows PC, check that DL-10 is not

active.

If DL-10 is active, right-click on the DL-10 icon in the task bar, and click

[Exit].

• If the DL-10 icon is not displayed in the task bar, you do not need to perform Step 2.

Load a battery with adequate remaining power into the camera.

Load the SD memory card into the camera, and turn the power on.

Display the camera's setup menu tab, select [Format [Card]], and press

the $ button.

glaunch3

glaunch8

For Macintosh

glaunch3

glaunch8