Ricoh gr digital III 사용 설명서 - 페이지 3

{카테고리_이름} Ricoh gr digital III에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh gr digital III 5 페이지. Firmware update
Ricoh gr digital III에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)

페이지 인쇄

Select [Yes], and press the MENU/OK button.

• The SD memory card is formatted.

Caution

If you format a card that still has images stored on it, the images will be lost. Save the images you do not want to erase in

your computer before formatting the card.

Turn the camera off, and connect the camera and computer with the

provided USB cable.

• The camera turns on automatically. If the camera does not turn on automatically, press the

POWER button and turn the power on.

• If DC Software is installed in your Windows PC, DL-10 may automatically start up. In this

case, exit DL-10.

• Click [Cancel] if the [Removable Disk] dialog appears in Windows XP or Windows Vista.

• If iPhoto starts up in Mac OS X, exit iPhoto.

Copy the files [glaunch3] and [glaunch8], created when the firmware was

extracted, into [RICOHDCX] root directory. The [RICOHDCX] will be

mounted as follows. For Windows, in [My computer]; for Macintosh, on

the desktop.

• The camera's drive name may differ depending on the OS you are running.

e.g. [Removable Disk], etc.

For Windows

Confirm that the files have been copied.

10.

For Windows

When the copying of the firmware is completed, double-click the [Safely

Remove Hardware] icon in the task bar.

For Macintosh

Drag and drop the [RICOHDCX] icon to the [Trash] icon. Once the icon

has disappeared, proceed to Step 14.

Caution

If you skip the procedures in Step 10, the firmware copy may not be successful.

11.

Select [USB Mass Storage Device], and click [Stop].

12.

Click [OK].

glaunch3

glaunch8

RICOHDCX

For Macintosh

glaunch3

glaunch8