ページを印刷する
REPLACEMENT AND ADJUSTMENT
14. Adjust the image positions in the main scan direction.
•
Do SP2902 003, select Pattern 27, then print the trimming pattern.
•
Do SP1002 and adjust the image position in the main scan direction for
Trays 4, 5, 6, and 7.
•
Print the trimming pattern from each tray of the LCT and from the bypass
tray (if installed).
•
To do this, touch "Copy Window" in the SP display, select a tray, then push
[Start].
•
The distance of the test pattern line from the paper edge for each tray must
be 2 mm. If it is not 2 mm, adjust with SP1002 004 to 007, depending on
which tray is not within the specified 2 mm.
15. Do SP1912 002 (CIS Image Position Adjustment: Normal Paper). This sets the
CIS for operation with standard copy paper.
16. Exit the SP mode.
17. Push [User Tools]> [Adjust Settings for Operators].
18. Once again, do SP1911 (CIS Image Position Adjustment: Feed Setting) and
reset the values for Trays 4, 5, 6, and 7 to "1" (ON).
2 mm
B832-16
B832R932.WMF
10 March 2006