Ricoh B832 Panduan Servis - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Servis untuk Aksesori Printer Ricoh B832. Ricoh B832 37 halaman.

REPLACEMENT AND ADJUSTMENT

14. Adjust the image positions in the main scan direction.

•

Do SP2902 003, select Pattern 27, then print the trimming pattern.

•

Do SP1002 and adjust the image position in the main scan direction for

Trays 4, 5, 6, and 7.

•

Print the trimming pattern from each tray of the LCT and from the bypass

tray (if installed).

•

To do this, touch "Copy Window" in the SP display, select a tray, then push

[Start].

•

The distance of the test pattern line from the paper edge for each tray must

be 2 mm. If it is not 2 mm, adjust with SP1002 004 to 007, depending on

which tray is not within the specified 2 mm.

15. Do SP1912 002 (CIS Image Position Adjustment: Normal Paper). This sets the

CIS for operation with standard copy paper.

16. Exit the SP mode.

17. Push [User Tools]> [Adjust Settings for Operators].

18. Once again, do SP1911 (CIS Image Position Adjustment: Feed Setting) and

reset the values for Trays 4, 5, 6, and 7 to "1" (ON).

2 mm

B832-16

B832R932.WMF

10 March 2006