- ページ 5

ネットワーク・ルーター Cisco 1600 seriesのPDF マニュアルの取り付けまたは交換をオンラインで閲覧またはダウンロードできます。Cisco 1600 series 10 ページ。 Rdiag router analog ipsec
Cisco 1600 series にも：クイック・スタート・マニュアル (12 ページ), クイック・スタート・マニュアル (8 ページ), ハードウェア・インストール・マニュアル (14 ページ)

Installing or Replacing the DRAM SIMM

Take the following steps to install or replace the DRAM SIMM:

Step 1

Figure 4

DRAM SIMM

Step 2

Caution

SIMM carefully.

If the router has a DRAM SIMM already installed, locate it on the system card. With the

rear panel of the router facing you, the DRAM SIMM is located in the upper left corner

of the system card, as shown in Figure 4. If there is no DRAM SIMM installed the router,

proceed to Step 3 to install a DRAM SIMM in the location shown in Figure 4.

DRAM SIMM Location—Cisco 1600 Series Routers

Remove any existing DRAM SIMM. While pulling outward on the tabs to unlatch them,

raise the SIMM to the vertical position and remove it from the SIMM socket.

(See Figure 5.)

To prevent damage, do not push on the center of the DRAM SIMM. Handle the DRAM

Installing or Replacing the DRAM SIMM in Cisco 1600 Series Routers

Installing or Replacing the DRAM SIMM

Rear panel of router