- ページ 10
ネットワーク・ルーター Cisco 2610 - Router - ENのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 2610 - Router - EN 19 ページ。 Cisco 2610: quick start
Cisco 2610 - Router - EN にも： データシート (8 ページ)
ページを印刷する4
Finish the Cabling
This section applies only if your are connecting more
than one modem.
If you connected one modem in the procedure on
page 7, you are now ready to cable the rest of your
modems. How you do this depends on the way you
organize your workspace and your own personal
preferences.
The following suggested procedure helps you
simplify the job by keeping the connections neat and
orderly and by providing a reliable process.
1
Make sure you can reach the router's rear panel.
2
Pick up a pink modem cable and connect one
end into one modem port (also pink) of the
access server.
10
3
Repeat Step 2 with the remaining pink modem
cables.
4
Connect the other end of each of the pink
modem cables from Step 3 into an RJ-11 wall
jack or into an RJ-11 outlet in your wiring
closet.
5
Tie-wrap your cable bundles.
6
To help with maintenance and troubleshooting,
write down the access server port number and
telephone wall jack for each modem. Keep this
record in a safe place.