Cisco 2610 - Router - EN 빠른 시작 매뉴얼 - 페이지 10
{카테고리_이름} Cisco 2610 - Router - EN에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2610 - Router - EN 19 페이지. Cisco 2610: quick start
Cisco 2610 - Router - EN에 대해서도 마찬가지입니다: 데이터시트 (8 페이지)
페이지 인쇄4
Finish the Cabling
This section applies only if your are connecting more
than one modem.
If you connected one modem in the procedure on
page 7, you are now ready to cable the rest of your
modems. How you do this depends on the way you
organize your workspace and your own personal
preferences.
The following suggested procedure helps you
simplify the job by keeping the connections neat and
orderly and by providing a reliable process.
1
Make sure you can reach the router's rear panel.
2
Pick up a pink modem cable and connect one
end into one modem port (also pink) of the
access server.
10
3
Repeat Step 2 with the remaining pink modem
cables.
4
Connect the other end of each of the pink
modem cables from Step 3 into an RJ-11 wall
jack or into an RJ-11 outlet in your wiring
closet.
5
Tie-wrap your cable bundles.
6
To help with maintenance and troubleshooting,
write down the access server port number and
telephone wall jack for each modem. Keep this
record in a safe place.