- ページ 7

ネットワーク・ルーター Cisco 2610 - Router - ENのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 2610 - Router - EN 19 ページ。 Cisco 2610: quick start
Cisco 2610 - Router - EN にも：データシート (8 ページ)

ページを印刷する

1. Quick Start Guide

Connect Cables (continued)

MODEMS

16AM

IN USE

Analog modem

port (RJ-11)

RJ-11 modem cable

Connect the Modem Cables

The Cisco 2610 router comes with an 8- or 16-port

internal analog modem module. Use these ports to

connect up to 16 modems.

Timesaver

Start by connecting only one

modem. After you have conﬁgured the

router settings for this modem and

completed the procedure on page 9

successfully, connect and set up the

remaining modems.

Connect one end of the pink modem cable to one

of the numbered modem ports (also pink) on the

router's rear panel.

Connect the other end of the pink modem cable

to an RJ-11 telephone wall jack or an RJ-11

outlet in your wiring closet.

IN USE

SERIAL 1

SERIAL 0

CONN

WIC

CONN

2A/S

CONN

SEE MANUAL BEFORE INSTALLATION

LINK

ETHERN ET 0

CONSOL E

RJ-11 jack

SERIAL 1

100-240V – 1A

50/60 Hz

47 W

SERIAL 0

WIC

CONN

AUX

If you followed the suggestion, in the Timesaver

section on this page, and only connected one cable,

you will have to connect the remaining modem

cables after you conﬁgure and test the router. See

page 10, for information on how to ﬁnish the

cabling.