- ページ 10

ネットワーク・ルーター Cisco 7100 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7100 Series 25 ページ。 Field-replaceable units in vpn routers
Cisco 7100 Series にも： 設置マニュアル (21 ページ)

ページを印刷する
Cisco 7100 Series クイック・スタート・マニュアル
Connect the Router to the Network
(continued)
8
Connect the T3 Ports
The T3 port supports full-duplex operation
at T3 (45-Mbps) speeds. Use a 75-ohm
coaxial cable to connect to a T3 serial
network. Serial cables conform to
EIA/TIA-612 and EIA/TIA-613
specifications. The T3 serial ports on the
router are considered to be DTE devices.
Note: The T3 ports support several types
of integrated DSUs. For a listing of DSU
feature compatibilities, refer to Appendix C,
"Cable Specifications," in the Cisco 7100
Series VPN Router Installation and
Configuration Guide.
5
I
RCV R
EN
Serial 1/0
To T3 network
equipment
XMT R
RCLK FERF RL
RCLK FERF RL
RCV R
XMT R
AIS OOF LL
AIS OOF LL
Serial 2/0
1
Attach the appropriate 75-ohm coaxial
cable directly to the receptacle on the
router and tighten the strain-relief
screws.
2
Attach the network end of the coaxial
cable to the external synchronous serial
equipment.