- ページ 12
ネットワーク・ルーター Cisco 7100 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7100 Series 25 ページ。 Field-replaceable units in vpn routers
Cisco 7100 Series にも： 設置マニュアル (21 ページ)
ページを印刷する
Connect the Router to the Network
(continued)
10
Connect the ATM T3 or E3
Ports
The T3 port supports full-duplex operation
at T3 (45-Mbps) speeds. The E3 port
supports full-duplex operation at E3
(34-Mbps) speeds. Use a 75-ohm coaxial
cable to connect to a T3 or E3 ATM serial
network. Serial cables conform to
EIA/TIA-612 and EIA/TIA-613
specifications. The T3 and E3 serial ports on
the router are considered to be DTE devices.
5
I
DS3
TX
EN
RX
CEL CAR ALM
Serial 1/0
To ATM T3 network
equipment
RX
1
Attach a 75-ohm coaxial cable directly
to the receptacle on the router.
2
Attach the network end of the cable to
the external synchronous serial
equipment.
Note: The E3 coaxial cable (not shown)
comes with an attached ferrite bead.