- ページ 8

プロジェクター Epson LCD projectorのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Epson LCD projector 11 ページ。 Itrc guide

Shutting Down the LCD Projector

To turn off, push the red

Power button. You will see

a confirmation message.

Press Power again to turn off

the projector.

Note: After turning off the

power to the projector, wait

until the fan turns off before

unplugging it. Once the

Power Light stops flashing,

and stays on, it is safe to

unplug the projector.

Next to the Power Light are two additional warning lights. Take notice if any of these

lights appear.

If the Lamp Warning Light is flashing, notify the ITRC that the lamp needs to be

changed.

If the Temperature Status Light is flashing orange, notify the ITRC to clean the air

filter. If the Temperature Status Light is flashing red, turn off the lamp immediately,

and allow the fan to run to cool down the temperature.

If you are having trouble with audio or video, first select the Help option on the remote

or on the projector's control panel. For specific questions or for troubleshooting, see the

User's Guide. On the Internet you can reach Epson's support page at

http://support.epson.com

or http://www.presentersonline.com. You can also contact the

ITRC by phone (282-5880) or email at [email protected]. The ITRC suggests attending a

workshop on the operation of the LCD projector. For information regarding ITRC

workshops dates and registration, visit the ITRC website, at http://www.isu.edu/itrc/.

Page 8 of 10

Last Modified: 3/22/2010