- ページ 18

ネットワーク・ルーター Cisco WS-X45-SUP6-E - Supervisor Engine 6-EのPDF インストールと設定の注意をオンラインで閲覧またはダウンロードできます。Cisco WS-X45-SUP6-E - Supervisor Engine 6-E 30 ページ。

Attaching Module Interface Cables

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into

Warning

beams or view directly with optical instruments. Statement 1051

Figure 5

Light out

of fiber

SC Connector

The SC connector, shown in

the external SMF or MMF network.

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into

Warning

beams or view directly with optical instruments. Statement 1051

Make sure that the optical connectors are clean before making the connections. Contaminated connectors

Note

can damage the fiber and cause data errors.

Always insert the network connector completely into the socket. A secure connection is especially

important when you are establishing a connection between a module and a long distance (1.24 miles)

(2 km) network or a module and a suspected highly attenuated network. If the link LED does not light,

try removing the network cable plug and reinserting it firmly into the module socket. It is possible that

dirt or skin oils have accumulated on the plug faceplate (around the optical-fiber openings), generating

significant attenuation and reducing the optical power levels below threshold levels so that a link cannot

be made.

Use extreme care when removing or installing connectors so that you do not damage the connector

Caution

housing or scratch the end-face surface of the fiber. Always install protective covers on unused or

disconnected components to prevent contamination. Always clean fiber connectors before installing

them.

Installation and Configuration Note for the Catalyst 4500 E-Series Supervisor Engine 6-E

SC-Type Fiber-Optic Connector

Plug

Keys

Cable

Receptacle

Light into

fiber

Key slots

Figure

5, is used to connect fiber-optic module ports or transceivers with

78-18337-01