- ページ 9

無線アクセスポイント Cisco 1800 SeriesのPDF 設定をオンラインで閲覧またはダウンロードできます。Cisco 1800 Series 32 ページ。 Cisco ios software configuration
Cisco 1800 Series にも：クイック・スタート・マニュアル (28 ページ), データシート (16 ページ)

ページを印刷する

Configuring Radio Settings on an Access Point

DETAILED STEPS

Command or Action

Step 1

enable

Example:

Router> enable

Step 2

configure terminal

Example:

Router# configure terminal

Step 3

interface dot11Radio interface

Example:

Router(config)# interface dot11Radio 0/3/0

Step 4

channel {number | MHz | least-congested}

Example:

Router(config-if)# channel 2457

Step 5

end

Example:

Router(config-if)# end

Step 6

copy running-config startup-config

Example:

Router# copy running-config startup-config

end

copy running-config startup-config

How to Configure Radio Settings on an Access Point

Purpose

Enables privileged EXEC mode.

Enter your password if prompted.

•

Enters global configuration mode.

Enters radio interface configuration mode.

The interface argument is in module/slot/port format,

•

except for the Cisco 800 series and Cisco 1800 series

fixed-configuration routers, where the interface

argument is either 0 or 1.

The 2.4-GHz radio is port 0, and the 5-GHz radio is

•

port 1.

(Optional) Sets the default channel for the AP radio.

Returns to privileged EXEC mode.

(Optional) Saves your entries in the configuration file.