Cisco 1800 Series Yapılandırma - Sayfa 9
Kablosuz Erişim Noktası Cisco 1800 Series için çevrimiçi göz atın veya pdf Yapılandırma indirin. Cisco 1800 Series 32 sayfaları. Cisco ios software configuration
Ayrıca Cisco 1800 Series için: Hızlı Başlangıç Kılavuzu (28 sayfalar), Veri Sayfası (16 sayfalar)
Sayfayı Yazdır
Configuring Radio Settings on an Access Point
5.
6.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface dot11Radio interface
Example:
Router(config)# interface dot11Radio 0/3/0
Step 4
channel {number | MHz | least-congested}
Example:
Router(config-if)# channel 2457
Step 5
end
Example:
Router(config-if)# end
Step 6
copy running-config startup-config
Example:
Router# copy running-config startup-config
end
copy running-config startup-config
How to Configure Radio Settings on an Access Point
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enters radio interface configuration mode.
The interface argument is in module/slot/port format,
•
except for the Cisco 800 series and Cisco 1800 series
fixed-configuration routers, where the interface
argument is either 0 or 1.
The 2.4-GHz radio is port 0, and the 5-GHz radio is
•
port 1.
(Optional) Sets the default channel for the AP radio.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
9