- ページ 27

無線アクセスポイント Cisco AIR-LAP1310GのPDF 取付方法をオンラインで閲覧またはダウンロードできます。Cisco AIR-LAP1310G 40 ページ。 Cisco aironet 1300 series lightweight outdoor access point

Figure 9

Long flanged hex bolt

Carriage bolt

Align the holes in the mast pipe with the holes in the base plate.

Step 3

Insert the long flanged hex bolt and washer into the upper holes on the base plate and through the mast

Step 4

pipe (see

Place a washer and hex nut on the end of the long flanged hex bolt and hand-tighten.

Step 5

Position the mast pipe and base plate as shown in

Step 6

Align the lower square hole in the mast pipe with the semi-circular cut-out on the base plate.

Step 7

Place the carriage bolt into the square hole on the inside of the mast pipe.

Step 8

Place a washer and hex nut on the end of the carriage bolt and hand-tighten.

Step 9

Step 10

Repeat Steps 8 and 9 for the other square hole.

You have completed the assembly of your rooftop or wall mount. To mount your rooftop or wall mount,

please refer the

78-17634-01

Rooftop Support Bolt Locations

Figure

9).

"Mounting the Access Point" section on page

Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions

Carriage bolt

Figure

10.

Mounting the Access Point