- ページ 29

無線アクセスポイント Cisco AIR-LAP1310GのPDF 取付方法をオンラインで閲覧またはダウンロードできます。Cisco AIR-LAP1310G 40 ページ。 Cisco aironet 1300 series lightweight outdoor access point

Figure 11

Attach the supplied ground lug to the two threaded mounting studs on the access point using the two

Step 4

supplied locking Hex nuts. Torque the nuts to 10 to 12 in-lb.

Note

Attaching the Mounting Bracket

The mounting bracket is suitable for rooftop, mast, or tower supports. How you attach the mounting

bracket to the support depends on the mast diameter, as follows:

Mast Type

Rooftop support

or small mast

78-17634-01

Ground Lug Attachment Point

Threaded mounting studs for the ground lug

Do not remove the two factory installed lock nuts on the mounting studs.

After you install the access point on its support, connect this ground to the building ground using

6 AWG wire.

Mast Diameter

1.25 to 2.75 in.

(30.5 to 69.9 mm)

Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions

Mast Attachment

Attach the mast to the mounting bracket between the

bracket and access point (see

Mounting the Access Point

Figure

12)