- ページ 18

無線アクセスポイント Cisco Aironet 1300 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet 1300 Series 35 ページ。 Outdoor access point/bridge
Cisco Aironet 1300 Series にも：データシート (15 ページ)

ページを印刷する

Cisco Aironet 1300 Series クイック・スタート・マニュアル

Using a Telnet Session to Access the CLI

Follow these steps to access the CLI using a Telnet session. These steps are

for a PC running Microsoft Windows with a Telnet terminal application.

Check your PC operating instructions for detailed instructions.

1. Choose Start > Programs > Accessories > Telnet.

If Telnet is not listed in your Accessories menu, choose Start > Run,

type Telnet in the entry field, and press Enter.

2. When the Telnet window appears, click Connect and choose Remote

System.

3. In the Host Name field, type the access point's IP address and click

Connect.

Assigning Basic Settings

After you determine or assign the bridge's IP address, you can browse to the

bridge's Express Setup page and perform an initial configuration. Follow

these steps.

1. Open your Internet browser. The bridge web-browser interface is fully

compatible with these browsers: Microsoft Internet Explorer 6.0 and

later and Netscape Navigator 7.0 and later.

78-15954-02