Cisco Aironet 1300 Series 빠른 시작 매뉴얼 - 페이지 18

{카테고리_이름} Cisco Aironet 1300 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1300 Series 35 페이지. Outdoor access point/bridge
Cisco Aironet 1300 Series에 대해서도 마찬가지입니다: 데이터시트 (15 페이지)

페이지 인쇄

Using a Telnet Session to Access the CLI

Follow these steps to access the CLI using a Telnet session. These steps are

for a PC running Microsoft Windows with a Telnet terminal application.

Check your PC operating instructions for detailed instructions.

1. Choose Start > Programs > Accessories > Telnet.

If Telnet is not listed in your Accessories menu, choose Start > Run,

type Telnet in the entry field, and press Enter.

2. When the Telnet window appears, click Connect and choose Remote

System.

3. In the Host Name field, type the access point's IP address and click

Connect.

Assigning Basic Settings

After you determine or assign the bridge's IP address, you can browse to the

bridge's Express Setup page and perform an initial configuration. Follow

these steps.

1. Open your Internet browser. The bridge web-browser interface is fully

compatible with these browsers: Microsoft Internet Explorer 6.0 and

later and Netscape Navigator 7.0 and later.

78-15954-02