- ページ 12

無線アクセスポイント Cisco Aironet 2600 SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet 2600 Series 39 ページ。
Cisco Aironet 2600 Series にも：スタートマニュアル (27 ページ), データシート (7 ページ)

ページを印刷する

Performing a Pre-Installation Configuration

The following procedures ensure that your access point installation and initial operation go as

expected. A pre-installation configuration is also known as priming the access point. This procedure

is optional.

Performing a pre-installation configuration is an optional procedure. If your network

Note

controller is properly configured, you can install your access point in its final location and

connect it to the network from there. See the

Network" section on page 15

Pre-Installation Configuration Setup

The pre-installation configuration setup is shown in

Figure 4

Pre-Installation Configuration Setup

To perform pre-installation configuration, perform the following steps:

for details.

Figure

Controller

Layer 3

devices

Cisco Aironet

access points

"Deploying the Access Point on the Wireless