Cisco Aironet 2600 Series 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Cisco Aironet 2600 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 2600 Series 39 페이지.
Cisco Aironet 2600 Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (27 페이지), 데이터시트 (7 페이지)

페이지 인쇄
Cisco Aironet 2600 Series 시작하기 매뉴얼

Performing a Pre-Installation Configuration

The following procedures ensure that your access point installation and initial operation go as
expected. A pre-installation configuration is also known as priming the access point. This procedure
is optional.
Performing a pre-installation configuration is an optional procedure. If your network
Note
controller is properly configured, you can install your access point in its final location and
connect it to the network from there. See the
Network" section on page 15

Pre-Installation Configuration Setup

The pre-installation configuration setup is shown in
Figure 4
Pre-Installation Configuration Setup
To perform pre-installation configuration, perform the following steps:
12
for details.
Figure
Controller
Layer 3
devices
Cisco Aironet
access points
"Deploying the Access Point on the Wireless
4.