- ページ 10
無線アクセスポイント Cisco Aironet AIR-AP1200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet AIR-AP1200 36 ページ。 Aironet 1100/1200 series
Cisco Aironet AIR-AP1200 にも： 注文マニュアル (6 ページ)
ページを印刷する
Installing the 802.11g Radio
Follow these steps to install the 802.11g radio:
Caution
ESD can damage the internal access point components and the
802.11g radio if they are not handled properly.
1. Carefully remove the 802.11g radio from its anti-static bag.
2. Grasp the card only on the edges, being careful not to touch components
on the board or the gold connector pins.
3. Place the radio on the anti-static work surface next to the antenna card.
Caution
Do not use long-nose pliers or similar tools. To avoid damaging
the antenna wire assemblies, handle them by their connectors.
4. Use your fingers to carefully connect the antenna wire connectors to the
mating connectors on the 2.4-GHz radio card as shown in the illustration
on the following page.
10