Cisco Aironet AIR-AP1200 사용자 설명서 - 페이지 10
{카테고리_이름} Cisco Aironet AIR-AP1200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet AIR-AP1200 36 페이지. Aironet 1100/1200 series
Cisco Aironet AIR-AP1200에 대해서도 마찬가지입니다: 주문 매뉴얼 (6 페이지)
페이지 인쇄
Installing the 802.11g Radio
Follow these steps to install the 802.11g radio:
Caution
ESD can damage the internal access point components and the
802.11g radio if they are not handled properly.
1. Carefully remove the 802.11g radio from its anti-static bag.
2. Grasp the card only on the edges, being careful not to touch components
on the board or the gold connector pins.
3. Place the radio on the anti-static work surface next to the antenna card.
Caution
Do not use long-nose pliers or similar tools. To avoid damaging
the antenna wire assemblies, handle them by their connectors.
4. Use your fingers to carefully connect the antenna wire connectors to the
mating connectors on the 2.4-GHz radio card as shown in the illustration
on the following page.
10