- ページ 7

無線アクセスポイント Cisco WAP361のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco WAP361 17 ページ。 Reboot and reset to factory default settings
Cisco WAP361 にも：マニュアル (4 ページ)

ページを印刷する

Figure 3

Mounting Bracket Screw Dimensions

Make sure all cables are clear and the bracket sits flush

OTE

against the wall / junction box. The joint created with the screws

must have a minimum pullout force of 20 lbs (9 kg).

Connect the Ethernet cable and the power cable (optional) to the

TEP

access point.

With the access point's LAN1-4 ports facing down and the rear

TEP

metal side of the access point facing the bracket, gently slide the

access point onto the bracket. If properly done, the Kensington

lock slot on the AP and the security screw hole on the mounting

bracket will be aligned.

Insert the security screw (see

TEP

the access point and tighten it till the screw head is flush with the

access point's body (see

provided in the Mounting Kit.

Figure 4

Security Screw Dimensions

All dimensions in millimeters (mm).

Cisco WAP361 Quick Start Guide

Figure

4) into the hole on the top of

Figure

2). The security screw is