Cisco WAP361 Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Wireless Access Point Cisco WAP361. Cisco WAP361 17 pages. Reboot and reset to factory default settings
Also for Cisco WAP361: Manual (4 pages)

Print Page
Cisco WAP361 Quick Start Manual
Figure 3
Mounting Bracket Screw Dimensions
Make sure all cables are clear and the bracket sits flush
N
OTE
against the wall / junction box. The joint created with the screws
must have a minimum pullout force of 20 lbs (9 kg).
Connect the Ethernet cable and the power cable (optional) to the
S
6
TEP
access point.
With the access point's LAN1-4 ports facing down and the rear
S
7
TEP
metal side of the access point facing the bracket, gently slide the
access point onto the bracket. If properly done, the Kensington
lock slot on the AP and the security screw hole on the mounting
bracket will be aligned.
Insert the security screw (see
S
8
TEP
the access point and tighten it till the screw head is flush with the
access point's body (see
provided in the Mounting Kit.
Figure 4
Security Screw Dimensions
All dimensions in millimeters (mm).
Cisco WAP361 Quick Start Guide
Figure
4) into the hole on the top of
Figure
2). The security screw is
7