- ページ 29

オール・イン・ワン・プリンター Epson CX4800 - Stylus Color InkjetのPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Epson CX4800 - Stylus Color Inkjet 48 ページ。 Epson scan icm updater v1.20 (psb.2008.07.001)
Epson CX4800 - Stylus Color Inkjet にも: スタート・ヒア・マニュアル (8 ページ), 技術概要 (6 ページ), ユーザーマニュアル (18 ページ), 更新 (1 ページ)

Epson CX4800 - Stylus Color Inkjet クイックマニュアル
Maintaining Your Epson
Stylus CX All-in-One
If you notice a decline in print quality, follow the instructions in this chapter for:
"Checking the Print Head Nozzles and Ink" (below)
"Cleaning the Print Head" on page 30
"Replacing Ink Cartridges" on page 31

Checking the Print Head Nozzles and Ink

If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles and remaining
ink levels using the control panel.
1. Turn off the Epson Stylus CX.
2. Load letter-size paper in the sheet feeder.
3. Press the
B
ink and P
3 seconds. The Epson Stylus CX turns on and prints a test pattern. It also
shows the percentage of ink left in each cartridge:
Print head does
not need to be
cleaned yet:
Print head needs
to be cleaned:
If the pattern does not look good, try cleaning the print head as described on the
next page.
Note:
You can also check the ink level using Status Monitor 3; see the on-screen
User's Guide.
buttons together and hold them down for about
On

Maintaining Your Epson Stylus CX All-in-One

29