Epson CX4800 - Stylus Color Inkjet 빠른 매뉴얼 - 페이지 29

{카테고리_이름} Epson CX4800 - Stylus Color Inkjet에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX4800 - Stylus Color Inkjet 48 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson CX4800 - Stylus Color Inkjet에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (8 페이지), 기술 요약 (6 페이지), 사용자 설명서 (18 페이지), 업데이트 (1 페이지)

페이지 인쇄
Epson CX4800 - Stylus Color Inkjet 빠른 매뉴얼
Maintaining Your Epson
Stylus CX All-in-One
If you notice a decline in print quality, follow the instructions in this chapter for:
■
"Checking the Print Head Nozzles and Ink" (below)
■
"Cleaning the Print Head" on page 30
■
"Replacing Ink Cartridges" on page 31

Checking the Print Head Nozzles and Ink

If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles and remaining
ink levels using the control panel.
1. Turn off the Epson Stylus CX.
2. Load letter-size paper in the sheet feeder.
3. Press the
B
ink and P
3 seconds. The Epson Stylus CX turns on and prints a test pattern. It also
shows the percentage of ink left in each cartridge:
Print head does
not need to be
cleaned yet:
Print head needs
to be cleaned:
If the pattern does not look good, try cleaning the print head as described on the
next page.
Note:
You can also check the ink level using Status Monitor 3; see the on-screen
User's Guide.
buttons together and hold them down for about
On

Maintaining Your Epson Stylus CX All-in-One

29