- ページ 4

無線アクセスポイント Cisco Wap581のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Wap581 14 ページ。 Reboot and reset to factory default settings
Cisco Wap581 にも：クイック・スタート・マニュアル (17 ページ), マニュアル (10 ページ)

ページを印刷する

If your network does not have an existing DHCP server, the WAP581 will

start a DHCP server for WLAN stations and stop the DHCP client when

WAP581 is in factory default. The DHCP server will assign the IP address

from 192.168.1.20 to 192.168.1.100.

Mounting the Cisco WAP581 Wireless-AC/

N Premium Dual Radio Access Point with

PoE Setup

You can place your access point on a desktop, or mount it on a wall or

ceiling.

Placement Tips

• Ambient Temperature—To prevent the access point from overheating,

do not operate it in an area that exceeds an ambient temperature of

104°F (40°C).

• Mechanical Loading—The device should be level, stable, and secure

to prevent it from sliding or shifting out of position.

Wall and Ceiling Mounting

The Cisco WAP581 can be wall or ceiling-mounted. There is a mounting kit

packed with your device. The kit is designed to install your device to the

wall or the ceiling.

The mounting bracket has some flexibility so that you can reuse existing

holes drilled for a Cisco WAP551 or WAP561 device. The installer can

remove the Cisco WAP551 or WAP561 and mount the Cisco WAP581. You

will need 4pcs of anchors and screws to mount the device.

The dimensions for the mount kit screws are as follows

Cisco WAP581 Wireless Access Point