- ページ 5

エアコン Argo APOLLOのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Argo APOLLO 12 ページ。 Air conditioner without outdoor unit
Argo APOLLO にも：サービスマニュアル (17 ページ), マニュアル (16 ページ)

ページを印刷する

2.2 - SIGNALING LEDs

NOTES

It is possible to set the air conditioner in order to switch OFF all LEDs, even during operation, by pressing the

●

LIGHT button on the remote control unit.

If the symbol

on remote control display is on, the air conditioner display will be on; if the symbol is off,

the air conditioner display will be off.

In case of troubleshooting the air conditioner diagnostic system activates the lamps accordingly, even if they

●

are set to OFF. See paragraph TROUBLESHOOTING for further details.

2.3 - ACCESSORIES SUPPLIED WITH THE UNIT

1. Strip of adhesive isolating tape (2pcs.)

2. Air inlet and outlet external grids including

chains and kit for installing the grids (2+2 pcs.)

3. Plastic sheet (2pcs.)

4. Wall anchoring brackets (2pcs.)

5. Operating and installation instructions

6. Paper drilling template

7. Remote control

8. Condensate discharge pipe

1. Receiver : it receives signals transmitted from the

remote control.

2. COOLING LED: This LED lights up when the air

conditioner is operating in cooling mode.

3. HEATING LED: This LED lights up when the air

conditioner is operating in heating mode.

4. DEHUMIDIFICATION LED: This LED lights up when

the air conditioner is operating in dehumidification

mode.

5. STANDBY LED: This LED lights up when you switch

off the air conditioner with the remote control and it

indicates also the WIFI status during unit's operation.

6. DIGITAL DISPLAY: it can display information such as

set temperature,ambient temperature, coil temperature,

status, fault code, etc.

The OFF position does not disconnect the power. Use

the main power switch to turn off power completely.

WARNING