ページを印刷する
Statistical Memory
How to Read the Statistical Memory Content
The taximeter records and keeps data in 2 Memory Blocks, each one divided in 45 locations.
The Block 1 allows to read, print or erase its information whenever desired.
The Block 2 allows to read and print its content but not to erase it.
The Block 1 is useful to control and analise the working shift data.
The Block 2 for its nature is cumulative and not erasable.
Select For Hire position.
Press K1 and K2 at the same time.
Now the sign "FOR HIRE" starts blinking.
The extras display will show: in the left digit the block .
and in the right digit the number of block location (1- 7).
The main display will show the selected location data value.
To increase the location number press K2 button.
To decrease the location number press K1 button.
Press K3 button to toggle between Block 1 and Block 2.
P.S. From location n.1 a further K1 depression will go back to
to For Hire mode.
The same would happen from location n. 7 with a K2 button
depression.
Press OP button to end the reading procedure and go back to
For Hire position.
Loc.
Memory Content
1)
Total Trips
2)
Total Units
3)
Total Kilometers in Hired / Stopped
4)
Total Kilometers
5)
Hours in Waiting Time
Income by the Fare
6)
7)
Income by the Extras
The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
How to read the memory blocks information
Locations Content
11