- ページ 3

オール・イン・ワン・プリンター Epson ET-4810 SeriesのPDF ここからスタートをオンラインで閲覧またはダウンロードできます。Epson ET-4810 Series 4 ページ。

ページを印刷する

Follow the on-screen instructions to adjust the print

quality of your product.

Note:

• You need to load paper before you can adjust the print quality.

See "Load paper" on this sheet for details.

• Select Adjust Later if you want to adjust the print quality later.

For more information, see the online User's Guide.

After setup, periodically inspect the ink levels to ensure they

Caution:

do not fall below the

lowest lines on the tanks. Prolonged use when

any ink level is below the lowest line could damage the product. See

the online User's Guide for refilling instructions.

Load paper

See the online User's Guide for information about loading

capacity, available paper types and sizes, loading envelopes,

and using the ADF.

Make sure the product is done charging the ink. Then

raise the paper support and tilt it backwards slightly.

Slide the edge guides all the

way out.

Load paper, glossy or

printable side up and short

edge first, in the middle of

the rear paper feeder.

Do not load paper above the line under the

Note:

the edge guide.

Slide the edge guides against

the paper, but not too tightly.

Open the front cover.

Pull out the output tray and raise

the paper stopper.

Select the paper settings on the product's control panel.

Connect the fax line

Connect a phone cord to a telephone wall jack and to the

LINE port on your product. See the online User's Guide

for more information.

Press the OK button to set up the fax, or press the

# pound button to set it up later.

Install software

Note:

• An Internet connection is required to obtain the product software.

• To print from a Chromebook™, go to

http://epson.com/support/chromebookprint (U.S.) or

http://epson.ca/support/chromebookprint (Canada) for

instructions.

Make sure the product is NOT CONNECTED to your

computer.

Windows

Cancel and disconnect the USB cable.

Download and run your product's software package. For

the latest software, visit:

http://epson.com/support/et4810 (U.S.) or

http://epson.ca/support/et4810 (Canada).

Follow the instructions on the computer screen to run the

setup program.

When you see the Select Your Connection screen, select

one of the following and follow the on-screen instructions:

•

symbol on

•

Mobile and voice-activated

printing

Print directly from your Android™ (v4.4 or later) device*.

•

Simply connect your printer and device to the same network

and tap the menu icon to select the print option.

•

Turn your mobile device into an intuitive, easy-to-use

printing and scanning control center with Epson Smart

Panel. Download the app from your mobile device's app

store.

Print remotely with Epson Connect™. See your

•

online User's Guide for instructions or learn more at

http://epson.com/connect (U.S.) or

http://epson.ca/connect (Canada).

If you see a Found New Hardware screen, click

Wireless connection

In most cases, the software installer automatically

attempts to set up your wireless connection. If setup

is unsuccessful, you may need to enter your network

name (SSID) and password.

Direct USB connection

Make sure you have a USB cable (not included).

Wired network connection

Make sure you have an Ethernet cable (not included).