- ページ 22

会議システム Cisco DX seriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco DX series 34 ページ。 Telepresence video systems

ページを印刷する

Cisco TelePresence Video Systems



Introduction

IP settings

(When not set by a provisioning system)

The IP parameters are assigned automatically by the network,

or you can set everything manually. If your system is provi-

sioned automatically, manual IP settings may be overridden by

the provisioning system.

If you want to set the parameters manually, contact your

network administrator to obtain the required parameters.

If an IPv4 address is already assigned to the system, you will

find it under

System

Information: Navigate to the gearwheel

icon in the upper left corner on the home screen and select

System Information.

If you wish to change the IP settings from the default dual

stack setting to either IPv4 or IPv6, this can be done on the

web interface. To set up IPv6 settings manually, use the Touch

controller or the web interface.

NOTE:

When you start your video system for the first time, the

setup assistant starts automatically. It skips the IP settings, if

those are already set up by the network.

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016.

User interfaces

Web interface

1. Navigate to the gearwheel icon on the home screen, and

select

System Information >

Connection

2. Uncheck

want to set the IP address manually.

3. Enter the

A soft keyboard appears when you select an input field.

Select

4. Navigate to the

address in the

5. Select

Apply

Setup assistant

Settings. Navigate to

and select

Network

Settings.

Default settings

and

DHCP automatic

setup, if you

Address,

Subnet Mask

and

Gateway

to confirm the change.

DNS

section and enter the DNS server

DNS Server 1

input field.

to save the changes.

Touch

Network

address.

Getting Started Guide

Appendices