- ページ 15

マトリックススイッチャー Cable Electronics HSW44C PlusのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cable Electronics HSW44C Plus 17 ページ。 4x4 hdmi matrix switch with cat5 output and up to 60khz ir

ページを印刷する

FAQ

The quality of output video is not good enough, how can I do?

P lease adjust t he 8-level equalization on the receiver units. The HDMI s ignal level varies

from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible

range to short distance. It is recommended to switch from 7 to 0 to ﬁnd the optimal visual

experience.

C an I use any kind of LAN cable?

P lease check the NOTICE s ection f or m ore information about how to p ick up a s uitable

cable.

C an every TV work with the HDMI matrix?

Basically, the answer is YES. But if your TV can not support 1080p, please refer the EDID

LEARNING section to learn EDID from your TV.

W hat is EDID? Why do I need to learn EDID?

E DID contains the whole information of the display such as the resolution and audio setting

which this d isplay can support. T herefore, based on t he E DID information, m edia p layer

will pick up the most suitable resolution and audio setting to the display. In order to faithfully

transmit the EDID information from display to the media player, learning EDID from display

to this device is necessary.

W hat should I do to learn EDID for the matrix?

D ue to the limitation of HDMI, the source device can only output one format of video and

audio. In other words, the source device cannot output 720p and 1080p video at the same

time, or output stereo and surround sound at the same time. Therefore, you may need to

manually setup the DIP switch for each HDMI input for desirable audio/video output format.

The mechanism of EDID Learning is to pick up the HDMI display with the lowest capability

among the ones you would use for this input source. For example, if user would like to play

the Input-2 upon output-2, output-4 and output-4, and only output-3 cannot support 1080p

[support up to 720p only], please learn the EDID from the display connected to the output-3

at the Input-2 port. Of course, if outpt-3 could get the HDMI signals from every HDMI input,

please learn EDID information from output5 to all eight HDMI inputs. For more information

about EDID Learning, please refer to EDID LEARNING section.

HSW44C, HSW44C PLUS, HSW88C, HSW88C PLUS

RJ45 Configuration: T568 B And Pin Out Signal's

TMDS:

1. DATA0-

2. DATA0+

3. DATA1-

4. DATA2-

5. DATA2+

6. DATA1+

7. CLOCK-

8. CLOCK+

DDC:

1. HP

2. IR SIGNAL

3. PWD

4. PWD

5. GND

6. GND

7. CONTROL 1

8. CONTROL 2