- ページ 18

ウェザーステーション ACU-RITE Iris 06014のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ACU-RITE Iris 06014 20 ページ。 (5-in-1) weather sensor (dual solar panel)

Troubleshooting Cont'd

Problem

Inaccurate wind readings

Display screen

not working

If your AcuRite product does not operate properly after trying the troubleshooting

steps, visit www.acurite.com/support

Specifications

TEMPERATURE RANGE

OUTDOOR HUMIDITY

RANGE

WIND SPEED

WIND DIRECTION

INDICATIONS

RAINFALL

WIRELESS RANGE

OPERATING FREQUENCY

POWER

DATA REPORTING

• What is wind reading being compared to? Pro weather stations are

typically mounted at 30 ft high or more. Make sure to compare data

using a sensor positioned at the same mounting height.

• Check location of the sensor. Ensure it's mounted a minimum of 5

ft in the air with no obstructions around it (within several feet).

• Ensure wind cups are spinning freely. If they hesitate or stop try

lubricating with graphite powder or spray lubricant.

• Check that the batteries are installed correctly. Batteries may

need to be replaced.

• Reset the display by pressing and holding the RESET button,

located in the battery compartment of the display. Date and time

will need to be entered after a reset.

Outdoor: -40˚F to 158˚F; -40˚C to 70˚C

Indoor: 32˚F to 122˚F; 0˚C to 50˚C

1% to 99%

0 to 99 mph; 0 to 159 kph

16 points

0.01 inches (0.25 mm) and up

330 ft/100 m

433 MHz

3 x AA alkaline batteries (required)

Wind Speed: 18 second updates

Direction: 36 seconds

Outdoor temperature & humidity: 36 second updates

Indoor temperature & humidity: 60 second updates

Possible Solution

depending on home construction materials