- ページ 2

ビデオカメラ Sony BRC-300のPDF 仕様をオンラインで閲覧またはダウンロードできます。Sony BRC-300 8 ページ。 3ccd color video camera
Sony BRC-300 にも：パンフレット＆スペック (8 ページ), パンフレット＆スペック (8 ページ), 仕様 (8 ページ), パンフレット (8 ページ), パンフレット (8 ページ), パンフレット＆スペック (8 ページ), コマンドリスト (23 ページ)

CRESTRON HARDWARE REQUIRED:

SETUP OF CRESTRON HARDWARE:

VENDOR FIRMWARE:

VENDOR SETUP:

CABLE DIAGRAM:

current speed will be displayed on the 2-digit display on a scale of 00- 99.

Rotate the wheel on the side of the C2N-CAMIDJ to the desired speed. The

speed will be automatically saved.

Continue selecting and setting speeds until High and Low speeds have

been set for Pan, Tilt, and Zoom. Focus speed cannot be set.

The normal use of the side wheel on the C2N-CAMI-DJ is for Focus Adjustments.

When Fo is displayed, the wheel will control focus. When Ir is displayed, Iris is being

controlled. When a number is displayed, a speed is being adjusted. Note that the

wheel will only control focus if the camera has been put into Manual Focus mode.

Some picture adjustments and white balance controls are only valid when the

camera is in certain modes. Please see the demo program for an example of how to

structure sub pages and button options for these functions.

CNX Internal com ports, C2 Internal com ports, ST-COM, CNXCOM-2, C2COM-2,

C2COM-3

RS232

Baud: 9600

Parity: N

Data Bits: 8

Stop Bits: 1

None

If you are using more than one camera with the VISCA inputs daisy chained, you

must pulse the Set_Addresses input. This will set the address of each camera on the

daisy chain. You should only pulse the Set_Addresses input on one of the modules in

the program, not on all of them.

CNSP-504