- ページ 14

ネットワーク・ハードウェア Cisco 2100 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 2100 Series 49 ページ。 Cisco 8500 series wireless lan controller
Cisco 2100 Series にも：設定マニュアル (40 ページ), 設定マニュアル (50 ページ), クイック・スタート・マニュアル (12 ページ)

ページを印刷する

Press the hyphen key if you need to return to the previous command line.

Note

Table 1

Startup Wizard Information

Wizard Setting

System Name

Administrative user name

Administrative user password

Management Interface IP Address

Management Interface Netmask

Management Interface Default Router

Management Interface VLAN Identifier

Management Interface Port Number

Management Interface DHCP Server IP Address

Action

Enter the system name, which is the name you

want to assign to the controller. You can enter up

to 32 ASCII characters.

Enter the administrative username and password

to be assigned to this controller. You can enter up

to 24 ASCII characters for each.

The default administrative username and

password are both admin and admin.

Enter the IP address of the management interface.

The management interface is the default interface

for in-band management of the controller and

connectivity to enterprise services such as AAA

servers.

You can access the controller's GUI interface

using this address.

Enter the IP address of the management interface

netmask.

Enter the IP address of the default router.

Enter the VLAN identifier of the management

interface (a valid VLAN identifier or 0 for an

untagged VLAN).

The VLAN identifier should be set to match the

switch interface configuration.

Enter the port number of the access point

manager interface.

Enter the management interface DHCP server IP

address.