- ページ 7

ネットワーク・ハードウェア Cisco 7200-I/O-2FE/EのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7200-I/O-2FE/E 16 ページ。 Input/output controllers

Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers

Configuring the Gigabit Ethernet Interface on the Cisco 7200-I/O-GE+E

The following example configures the Gigabit Ethernet interface on the Cisco 7200-I/O-GE+E. The

following commands are configured on slot 0, port 0.

Router# configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)# interface gigabitethernet 0/0

Router(config-if)# ip address 1.1.1.10 255.255.255.252

Router(config-if)# negotiation auto

Router(config-if)# end

Configuring Autonegotiation on the Cisco 7200-I/O-2FE/E

The following example configures the Fast Ethernet interface on the Cisco 7200-I/O-2FE/E for fully

enabled autonegotiation:

Router# configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)# interface fastethernet 0/0

Router(config-if)# duplex auto

Router(config-if)# speed auto

Command Reference

This section documents new or modified commands. All other commands used with this feature are

documented in the Cisco IOS Release 12.1 command reference publications.

•

interface gigabitethernet

negotiation

show controllers gigabitethernet

show interfaces gigabitethernet

Command Reference

12.1(5)T and 12.2(14) S