- ページ 10

デジタルカメラ Sony 6116.12 RX100 IIIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony 6116.12 RX100 III 32 ページ。 Digital housing (dsc-rx100m3/b)

STEP 4 - Attach the Control Ring Gear

The supplied Control Ring Gear is attached to the camera control ring by

3 small nylon Allen Set Screws. Place the Control Ring Gear over the

camera's step ring before installing the camera in the housing. The Gear

is a "press fit" over the lens. Gently tighten all three allen screws with

the supplied Allen Wrench as show below. DO NOT overtighten or you

may damage the gear, or cause it to warp and bow out from the lens

Control Ring. Make sure to test it's function once installed.

When installing the camera in the housing, make sure that the Control

Ring Gear meshes properly with the smaller black housing gear.

When removing the Gear, leave the Set Screws in the Gear. The Set

Screws are very small and easy to lose. Extra Set Screws are included

with your housing. We recommend that you leave the Gear installed as

it makes rotating the camera control ring easier when out of the housing.

Set Screw

Turn clockwise to tighten. DO NOT overtighten

or you may warp or damage the gear.

Control Ring Gear

(properly installed)

Allen

Wrench